DesignationISO 22343-1:2023/PRF Amd 1
Stage50.00, FDIS registered
Planning date, an estimate15 Feb 2027
Published todayISO 22343-1:2023
Sources

Every source, with what it supports

Each page cites the clause it comes from. This page lists the sources behind the record, the date each was read and the role each plays. A source that is not listed here is not used.

SourceLinkReadWhat it supports
ISO 22343-1:2023/PRF Amd 1, official record
ISO 22343-1:2023/PRF Amd 1, Edition 1, stage 50.00, 8 October 2026
Open2026-10-20The official record: designation, committee, ICS, stage history and stage dates. The four-page amendment text is not public at this stage and is not quoted.
ISO 22343-1:2023, official record
ISO 22343-1:2023, Edition 1, published September 2023, 55 pages
Open2026-10-20The base standard record: title, scope, abstract, committee, ICS, publication status, page count and the relationship to IWA 14-1:2013. The full text is not reproduced.
ISO 22343-1:2023, public document preview
ISO 22343-1:2023(E), public document preview: contents, foreword, scope, normative references and definitions
Open2026-10-20The public preview linked from the ISO record. It carries the contents, foreword, scope, normative references and definitions. The preview stops after Clause 3, so the pages for Clauses 4 to 8 state the published structure and the public guidance, not the exact clause wording.
NPSA, HVM Impact Rated: Rating System Explained
NPSA Catalogue of Security Equipment, HVM Impact Rated, Rating System Explained, March 2024
Open2026-10-20A public guidance note that explains the ISO 22343-1 rating string, the test vehicle classes and masses, and the differences from IWA 14-1 and PAS 68. Used for the rating decoder and the vehicle table.
ISO 22343-2:2023, Vehicle security barriers, Part 2: Application
ISO 22343-2:2023, Edition 1, published 2023
Open2026-10-20The companion application standard. ISO 22343-1 points to it for selection, installation and operational suitability guidance.

What is not a source

Secondary summaries, search snippets and memory are not sources. A clause answer that cannot be traced to the published text is not shipped. The site does not quote the amendment because the amendment is not public, and it does not present a secondary reading as the standard.

How the record is verified

Each clause line was written from the published base standard, the public preview and the NPSA rating guidance, and checked against the clause. The strict seven-word overlap test is run against the sources before release. The ISO record is re-read on every refresh and the build fails on a change. The method in full.

THE RECORD THIS IS BUILT FROM

Read from the public record, not invented

Every clause answer on this site points to the official record or the public preview behind it, so you can check any line yourself. The register holds 25 records, 111 evidence lines and 100 common failure lines. The dates come from the ISO stage record. The amendment text is not public, and this site does not describe what it changes.

16 CLAUSES

One page per clause

The requirement in our words, the evidence an assessor asks for, the common gaps and what to do before publication.

Open the register
9 ANNEX RECORDS

Normative and informative, labelled

Annex A is normative and carries the measurement controls. Annexes B to D are informative and say so.

Open the annexes
ONE STAGE RECORD

No invented date

Stage 50.00 is recorded on 8 October 2026. The planning date is an estimate and is labelled wherever it appears.

Read the record

The base standard is published. The amendment text is not public at FDIS. Each record cites the public source it comes from. Where the public record is silent, the page says so.